SPAX ALU stainless steel screw 5.0x44 mm for decking boards (pack of 100)

SPAX ALU stainless steel screw 5,0x44mm for decking boards (pack of 100)

Benefits

• Small cylindrical head: Sinks easily into the timber for a neat finish.
• Fine thread: Provides increased holding strength in aluminium.
• Drill point: Enables quick, clean screw insertion.
• Not suitable for timber with highly interlocked grain (Cumarú, Massaranduba, IPE boards > 21 x 120 mm, etc.).

Guidance:

• 44 mm length for boards up to 20 mm thick.
• 48 mm length for boards up to 24 mm thick.

Recommendations:

• Softwood boards: For aluminium substructures with a thickness of 3,0 mm.
• Hardwood boards: For aluminium substructures with a thickness of 4,0 mm.
• The use of SPAX Air between the board and the aluminium profile is recommended.
• Drill point: For aluminium profiles with a wall thickness of up to 4,0 mm, allowing screws to be driven without pre-drilling the aluminium.

Specifications:

• Weight: 1 kg
• Material grade: A2 steel
• Thickness (mm): 5,0
• Length (mm): 44
• Intended use: Aluminium, balcony, terrace